UNIDENTIFIED

IDE/FCD MULTI-I/O

Data bus: 16-bit, ISA

Size: Half-length, full-height card

Hard drives supported: Two AT Interface (IDE) drives

Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB

Special features Two serial and one parallel port

[Image]

                                CONNECTIONS

                     Function                             Location

  25-pin parallel port (LPT1/2)-external                     CN1

  9-pin serial port (COM1/3)-internal                        CN2

  9-pin serial port (COM2/4)-internal                        CN3

  40-pin AT Interface (IDE) control cable                    CN4
  connector-internal

  34-pin control cable connector-hard drive                  CN5

  2-pin connector-drive active LED                           CN6

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Floppy drive enabled                   JP1             pins 1 & 2
                                                              closed

      Floppy drive disabled                  JP1             pins 2 & 3
                                                              closed

  »   Parallel port address is 378h          JP2             pins 1 & 2
                                                              closed

      Parallel port address is 278h          JP2             pins 2 & 3
                                                              closed

      Parallel port disabled                 JP2               open

  »   Serial port 1 (COM1) address           JP3             pins 1 & 2
      is 3F8h                                                 closed

      Serial port 1 (COM3) address           JP3             pins 2 & 3
      is 3E8h                                                 closed

      Serial port 1 disabled                 JP3               open

  »   Serial port 2 (COM2) address           JP4             pins 1 & 2
      is 2F8h                                                 closed

      Serial port 2 (COM4) address           JP4             pins 2 & 3
      is 2E8h                                                 closed

      Serial port 2 disabled                 JP4               open

  »   Hard drive enabled                     JP5             pins 1 & 2
                                                              closed

      Hard drive disabled                    JP5             pins 2 & 3
                                                              closed

  »   IRQ14                                  JP6             pins 1 & 2
                                                              closed

      IRQ15                                  JP6             pins 2 & 3
                                                              closed